Heating element | Hot runner coil heater | Flexible heater

Heating element,Thermost heater,Hot runner coil heater,Flexible heater

Home > Products > Mould heating > C.Cartridge heater series
  1. Micro cartridge heater HSM3-S
  2. Micro cartridge heater HSM3-S

Micro cartridge heater HSM3-S

Micro cartridge heater HSM3-S

  1. Detailed information


Technical details(Φ1/8″~Φ10)
Dianeter deviation range(L≤100mm)﹣0.03~﹣0.06
Length deviation±1mm
L≤300mm(the location of cold zone)bottom4mm~8mm
Power requirementall of the specification in stock,and can customize the customer’s reqkirement
Power deviation(not heating)±10%(≤100W)
take the maximum between+5%~-10%(>100W)and ±10W
extension cord power(standard)(non-standard need customizel)230/115V
stability(at room temperature)600V
Leakage currentnot heating≤0.5mA
heating state≤1/6*Lh*T(℃)*10-5
Attached thermocouple J/Kmake as your raquirement
external surface material/internal materialstainless stell/heating electric wire+mgo products
Heating element operating temperaturemax.700℃
Insulation resistance(not heating)≥10MΩ
Insulation resistance(heating state)≥(10-0.015*T)/Lh*103
cable typeThe fiberglass silicon outside,and internal copper can achieve 350℃
Reference standardJB/T 2379-93

Leading wire type

Wire TypeFiberglass silicne copper wirePTFE wrappde copper wire
Temperature tolerance350℃300℃
Adcantages and disadvantageadvantages:High temperature resistance good electrical conductivty moderate line type.colour type:red line in white backgroundadvantages:High temperature resistance good electrical conductivty moderate cost comventional line type.colour type:Orange

Powered by Www.Heatle.Net  ©2008-2019 浙ICP备12015477号-1